Commercial trends · 4 min read
Commercial flooring in 2026: specifying a seamless concrete-style finish
A practical guide to specifying seamless floors for retail and offices: substrate checks, colour samples, slip resistance, movement joints and handover.
By Puur Floors · Updated
In brief
For a commercial floor, the useful question is not which finish is fashionable. It is whether the system suits the substrate, footfall, cleaning and programme. Use samples and a written specification to turn a design preference into an installation brief.
Seamless flooring: a design choice, not a promise of no joints
A continuous concrete-style surface can bring visual continuity to shops, offices and reception spaces. Puur describes PSR pours up to 1,000m², but a seamless appearance does not mean movement joints can be ignored.
Agree how existing joints, floor transitions and access requirements will be handled. An office refurbishment needs a substrate assessment before the floor system is specified.
Warm greys, neutral colours and physical samples
Colour is a project decision rather than a universal 2026 trend. Assess the floor beside the actual lighting, joinery and wall finishes, not in isolation.
Puur’s standard range comprises made-up physical samples held in stock. Bespoke samples can be produced in any RAL or NCS colour for a small additional charge credited against a confirmed order. Use the Visualiser to shortlist colours, then approve a physical sample.
Refurbishment: check what can be retained
A thin overlay may allow a suitable supporting floor to remain, avoiding a new exposed slab as the decorative finish. That is a design possibility, not proof that every existing floor can be retained.
Do not infer a carbon saving from thickness alone. A project-level environmental comparison would need product data, preparation, transport, service life and end-of-life assumptions.
Slip resistance and cleaning belong in the brief
The PSR SD21 technical data lists R12 dry and R11 wet ratings. Ask the technical team which finish and testing are appropriate for the actual use, including entrances, spill-prone areas and cleaning practices.
Specify the sealer and maintenance instructions as well as the colour. Handover should include the approved cleaning products and when the floor can be put into service.
A commercial specification checklist
Before tendering, collect the information that installers need to quote and plan consistently.
- Measured floor areas, drawings and access arrangements.
- Substrate type, moisture assessment, repairs and movement joints.
- Approved colour sample, surface finish and sealer.
- Expected use, slip requirements and cleaning regime.
- Agreed installation stages, protection and handover dates.
Sources & technical documents
Product documents can change. Confirm the current specification, finish and installation requirements with Puur before tender or installation.
